Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
They state in manual to Make it Light or Super Light you remove items
Photographer and Astrophile, Love the Ant on the Moon, Jupiter and Saturn and all time fav Andromeda Telescope: N/A Cameras: Nikon Z7ii 85mm f/1.8 ; DSS & Siril Mount: Sky Watcher EQM-35 WiFi Control: iPad via APPs
I would replace the removed 1/2 of the saddle and purchase a 100mm vixen dovetail to screw you camera onto.
That gives you a nice solid connection while the mount is tracking.
I will have to download the mount manual as I do not understand why Skywatcher would say to remove it.
I love confusion first thing in the morning!
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
Well I just read through the manual... most bizarre!
Strange to make a modular mount that ultimately just does the same thing in each configuration.
The recommendation I suggested is what is shown in section 1.8 (figure 13)
Maybe I need more coffee...
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
Lady Fraktor wrote: ↑Tue Mar 28, 2023 4:01 am
Well I just read through the manual... most bizarre!
Strange to make a modular mount that ultimately just does the same thing in each configuration.
The recommendation I suggested is what is shown in section 1.8 (figure 13)
Maybe I need more coffee...
Thank you, sorry I did not include diagrams from the manual.
This configuration is called Super light, meaning least weight if travelling light no need for Declination drive part or counter weights.
Mind you with this setup you need a ballhead or similar mount for camera so it can be pointed a object being photographed.
I might use it for starters, But I think the full setup with DEC assembly attached and camera mounted .
I still in the setup phase and figuring things out.
Still Need to get a 12 volt battery to power the system. Also weather is BAD so good to work on system now and be ready when it clears up at night.
Photographer and Astrophile, Love the Ant on the Moon, Jupiter and Saturn and all time fav Andromeda Telescope: N/A Cameras: Nikon Z7ii 85mm f/1.8 ; DSS & Siril Mount: Sky Watcher EQM-35 WiFi Control: iPad via APPs
It should be a sturdy base for your imaging.
Out of curiosity, do you know how much weight you actually save?
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
I'm just making sure that you are aware that your mount is capable of "auto-guiding". Meaning, you hook it up to your computer (many new drivers needed), and using software, like PHD2, your computer will do all the work!
Unfortunately (or not), you need both new hardware and software to do this.
Cheers,
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
Lady Fraktor wrote: ↑Tue Mar 28, 2023 6:59 pm
Out of curiosity, do you know how much weight you actually save?
I have not taken the DEC motor/counter balance off yet as I am leaning toward use the whole system as I don't really want to tear it down as I don't need to reduce weight as it will travel in car to darker skies
If I had to estimate , it looks like about 1/2 to 1/3 the whole weight of the assembly
Naturally if you go with the super light setup it does not include any counter weights so there is the main weight (Includes two 7.5-pound counterweights)
The head is rated at 9.6lbs guess that does not include the counter weight bar but not sure?
Mount Head Weight (lbs) 9.65
Tripod Weight (lbs) 12.5
Fully Assembled Weight (w/ weights) 37.15
Photographer and Astrophile, Love the Ant on the Moon, Jupiter and Saturn and all time fav Andromeda Telescope: N/A Cameras: Nikon Z7ii 85mm f/1.8 ; DSS & Siril Mount: Sky Watcher EQM-35 WiFi Control: iPad via APPs
JayTee wrote: ↑Tue Mar 28, 2023 8:14 pm
I'm just making sure that you are aware that your mount is capable of "auto-guiding". Meaning, you hook it up to your computer (many new drivers needed), and using software, like PHD2, your computer will do all the work!
Unfortunately (or not), you need both new hardware and software to do this.
Cheers,
Thank you, this will be very good. I have already looked into getting a Polar scope illumination LED as this mount does not have that. I've read that some use a LED light to help see the grid pattern, I am not sure how well I can see using it as it has not even been outside yet. I wanted to purchase the mount (based on info I got here) asap so I can start learning it while I wait for warmer and cloudless nights.
Yes I have read some of that already. Currently I only have an old Netbook (one of those small 9" screen or so tiny laptops) with Windows XP and also Linux. Not that familiar with Linux and don't know if the drivers will work with old Windows. I have a New iPad Air that I plan to to use for the control of the mount via WiFi ie the SynScan system (I did not buy the Handheld controller as I wanted to star a little cheaper and get the WiFi only version. The netbook does have several USB 2.0 ports. My larger Laptop would need a new battery and it also runs old Windows and would be very slow.
I have not been able to use the software/hardware as I do not have a 12 volt power source in the house yet. I plan to get a 12 volt power system but not sure what to get yet. I guess it would be handy to have USB ports on it as well. and also option to boost car battery in case that fails and also to power red lights for night vision etc.
Photographer and Astrophile, Love the Ant on the Moon, Jupiter and Saturn and all time fav Andromeda Telescope: N/A Cameras: Nikon Z7ii 85mm f/1.8 ; DSS & Siril Mount: Sky Watcher EQM-35 WiFi Control: iPad via APPs
The vast majority of APers on these forums use a PC laptop for control, myself included. It's a legacy thing because most of the freeware is PC only.
That aside, your mount in its current configuration should give you many fine images as long as you stick to the mount's strengths. This means shorter focal lengths and shorter exposures and a lot of image stacking.
When you are ready to upgrade then this mount should be a good intro mount for even longer exposures DSOAP. Remember to stick to the mount's strengths -- Don't go past 50% of the mount's payload capacity, use the "sweet spot" for FLs, and use auto-guiding to get those long exposures.
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
If you do need a light to see the polar scope reticle just shine a red light across the front of the polar scope.
It will provide enough light.
Or for a couple of euro you can build on of these from plastic plumbing pieces and a keychain red laser.
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
Lady Fraktor wrote: ↑Tue Mar 28, 2023 10:19 pm
If you do need a light to see the polar scope reticle just shine a red light across the front of the polar scope.
It will provide enough light.
Or for a couple of euros, you can build one of these from plastic plumbing pieces and a keychain red laser.
Krikees, what a great idea. I'm building one for my EQ6-R. I had a dickens of a time trying to illuminate that polar scope.
Thanks, Gabrielle,
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
A fellow observer on a different forum gave me the idea years ago, very handy if you do use a polarscope.
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
I have read about DIY illumination thanks for the photos, Need to go to plumbing store and get a fitting that works on my mount
Thanks
Photographer and Astrophile, Love the Ant on the Moon, Jupiter and Saturn and all time fav Andromeda Telescope: N/A Cameras: Nikon Z7ii 85mm f/1.8 ; DSS & Siril Mount: Sky Watcher EQM-35 WiFi Control: iPad via APPs