For a while i have had an issue with my scope both during setup and
The HBX firmware is A1F1 patched via starGPS and drives trained etc.
With the speed at 8 or 9 movement is smooth but slewing to centre the target the image ‘stutters’. Sometimes it works perfectly but most times it misbehaves. After a lot of help from likeminded folks i took the drive our and sent it to Meade US. After i removed it I could see that there was a misalignment between the motor axis and the gears line. It also looked like the plastic moulding connecting the gears and the motor was cracked.
Just in case the original drive doesn’t get repaired/make it back from the US does anyone know where i can ‘buy’ a replacement?
Thanks
Pete