CEM 70G Balance Issues
Posted: Sat Jan 30, 2021 10:28 pm
Anyone out there with the CEM 70G? I'm playing hell trying to get either of my scopes balanced on it. I purchased this to use as a portable rig since my SW EQ8-Rh is a bit on the heavy side to use as a portable setup.
Anyway I get a scope to balance on one side of theRA Axis just fine, but when I move to the other side to verify the balance, It's all out of wack. I have done this with both of my scopes and get the same thing.
I think I have figured out what is causing the issue. Poor design. I have attached a photo showing how there is more weight on the left than on the right of the Mount Head.
If you have found a fix for this issue, please share it with me and the rest of the world.
Anyway I get a scope to balance on one side of the
I think I have figured out what is causing the issue. Poor design. I have attached a photo showing how there is more weight on the left than on the right of the Mount Head.
If you have found a fix for this issue, please share it with me and the rest of the world.