Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
hello folks! I was going to get an exos2 GT but after a LOT of reading I went with a skyview pro goto. my question is can this be run from stellarium on my laptop?
thanks.
Rick.
gear.
1979 "orange tube" C8
Skyviw pro goto EQ
Nikon D3200 and HP-HD 4110 webcam moded
The answer is yes! Not only Stellarium but Cartes du Ciel and SkyTech X (STX) AFTER you have downloaded and installed the ASCOM drivers for your Orion mount and attached a new cable.
Just google Celestron ASCOM drivers (that's what the manual says) and it will take you right where you need to go. Plus you'll need one additional piece of hardware that consists of two cables. The first is an RJ11 to a serial plug, second, you'll need to plug that into a serial to USB plug to make one long cable. You plug the RJ11 end into the base of the hand controller (HC) and the other end into a USB slot in your laptop. Lastly, after you've plugged in the new cable, go to your device manager open the Com Port and see which Com Port was assigned to your serial to USB cable. ASCOM needs this information.
That should do it,
JT
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
awesome! thanks so much jeytee! the mount should be here tomorrow. (thur. June 17th) and i'm excited. the clock drives went out on the old original fork mount.
so it's going to be a real upgrade/learning experience! looking forward to it!
rick
gear.
1979 "orange tube" C8
Skyviw pro goto EQ
Nikon D3200 and HP-HD 4110 webcam moded
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
well the SVP mount came in! yayyy! the dovetail plate for the C8 is on back order "of course" but I set my celestron astromaster70 on it and I have to say I love this mount!!
it's so much better than the fork mount from 1979 "duh!" and really very solid! more testing when I mount the C8 but so far this looks to be a real game changer for me!
Rick
gear.
1979 "orange tube" C8
Skyviw pro goto EQ
Nikon D3200 and HP-HD 4110 webcam moded
scope and mount1.jpg (38.57 KiB) Viewed 11052 times
ok so got the mount. got the dovetail plate in just to find out it won't fit! grrrrr…… i'm going to make an adpt for it. but man what a let down! but here's my babby.
gear.
1979 "orange tube" C8
Skyviw pro goto EQ
Nikon D3200 and HP-HD 4110 webcam moded
Is the stock Celestron dovetail to wide for the SVP?
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
no. it's the right size for the SVP. the bolt pattern is wrong for the older (1979) model C8. have to have a adaptor or radius blocks. is all. I just wish they would tell you this in the description when you order a dovetail plate.
gear.
1979 "orange tube" C8
Skyviw pro goto EQ
Nikon D3200 and HP-HD 4110 webcam moded
Is it possible to post an image of the issue, I am a bit confused on this.
Gabrielle See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885 EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102 Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen Eyepieces: Antares to Zeiss (1000101) The only culture I have is from yogurt
thank you everyone for all the input, it means a lot! I got tired of fooling with it so I drilled and tapped it to fit. lol. which I think i like better than radius blocks. keeps the scope closer to the central axis and so a little more stable. working great! now, about those clouds!...…...
gear.
1979 "orange tube" C8
Skyviw pro goto EQ
Nikon D3200 and HP-HD 4110 webcam moded