Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
It's been about 5 months that I've had a ZWO EAF (electronic automatic focuser) and the ZWO 1.25" EFW Mini Electronic Five-Position Filter Wheel. On Monday I decided to finally get up off my behind and installed the EAF and it was a very simple procedure. The only additional equipment needed were two M4-0.7 x 25mm Socket Head Cap Screws. These were used to secure the motor bracket onto the base of my ES 102 f/7 APO refractor Crayford focuser. It was easy peasy! The filter wheel, installed yesterday, was also a simple procedure once I got the spacer distance correctly figured out for the FF I'm using (AT2FF). In my case, I needed 36mm of additional spacing between the EFW and the FF. This gave me the necessary 55mm from sensor to FF.
Both of these new pieces of gear were instantly recognized by all "could be used" titles like N.I.N.A., SharpCap, and ASI Studio. So now I just need the clouds to leave so I can use my new Optolong L-eXtreme dual-band filter installed in the EFW.
Here's the proof! Don't poo-poo the cable management, this "freestyle" method works. Also, the cable going up and over the EAF is the temp sensor. I figured it was best to just leave it "dangling" in space near the EAF to get an accurate reading. It is also in keeping with the "freestyle" cable management method.
Cheers,
Last edited by JayTee on Thu Apr 25, 2024 7:20 pm, edited 3 times in total.
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
Congrats on getting everything setup!
Looking forward to seeing the images when the sky co-operates!
Gordon
Scopes: Explore Scientific ED80CF, Skywatcher 200 Quattro Imaging Newt, SeeStar S50 for EAA.
Mounts: Orion Atlas EQ-g mount & Skywatcher EQ5 Pro.
ZWO mini guider.
Image cameras: ZWO ASI1600 MM Cool, ZWO ASI533mc-Pro, ZWO ASI174mm-C (for use with my Quark chromosphere), ZWO ASI120MC
Filters: LRGB, Ha 7nm, O-III 7nm, S-II 7nm
Eyepieces: a few.
Primary software: Cartes du Ciel, N.I.N.A, StarTools V1.4.