SGPro slew error
- jazzin
- Articles: 0
- Posts: 242
- Joined: Thu May 16, 2019 11:56 am
- 5
- Location: Southeast Louisiana
- Status:
Offline
-
TSS Photo of the Day
SGPro slew error
"Cannot complete slew! The requested coordinates is ... The horizon is set to 0.0.'
I had imaged with the same setup the night before and it worked fine.
Does anyone know what caused SGPro to throw this error, when it worked fine the previous night?
I'm hoping just a reboot will fix the problem.
Thanks.
Guide scope: 50mm guidescope
Camera: modded Canon T7i, stock Canon T1i
Software: PixInsight
I hate cold and rainy weather!
- Graeme1858 Online
- Co-Administrator
- Articles: 1
- Posts: 7586
- Joined: Mon Jun 24, 2019 7:16 pm
- 4
- Location: North Kent, UK
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
I Broke The Forum.
Re: SGPro slew error
Graeme
Celestron 9.25 f10 SCT, f6.3FR, CGX mount.
ASI1600MM Pro, ASI294MC Pro, ASI224MC
ZWO EFW, ZWO OAG, ASI220MM Mini.
APM 11x70 ED APO Binoculars.
https://www.averywayobservatory.co.uk/
- yobbo89 Online
- Articles: 0
- Posts: 2608
- Joined: Sat May 11, 2019 7:44 pm
- 5
- Location: australia qld brisbane
- Status:
Online
-
TSS Photo of the Day
Re: SGPro slew error
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- jazzin
- Articles: 0
- Posts: 242
- Joined: Thu May 16, 2019 11:56 am
- 5
- Location: Southeast Louisiana
- Status:
Offline
-
TSS Photo of the Day
Re: SGPro slew error
It is strange bc it worked fine just 24 hours before. I'm hoping it was just a glitch in SGPro because I did leave the program open all day and didn't close it from the prior nights session and restart the program. Clearing the star alignment sounds like it might be something to try if it happens again. We will see, I"ve never taken it back out yet to see if it cleared or is still going to throw the error. Thanks for the reply!yobbo89 wrote: ↑Wed Dec 13, 2023 2:00 pm what other software are you loading for the mount ? i've seen this type of error before with my si tech software and sgpro, adjusting the mount limits fixed it , check if you have meridian and horizon limits enabled in other software and then adjust or disable it, or try clearing star alighnment and re calibrate .
The only other program I had open at the time was phd2. I did have the Polemaster software open to polar align but I close it after I finished.
Guide scope: 50mm guidescope
Camera: modded Canon T7i, stock Canon T1i
Software: PixInsight
I hate cold and rainy weather!
- AstroBee Online
- Moderator
- Articles: 0
- Posts: 2345
- Joined: Thu Nov 14, 2019 11:03 pm
- 4
- Location: Henderson, NV
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: SGPro slew error
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute