Scope rebuild project
- Durad
- Articles: 0
- Posts: 4
- Joined: Sun Oct 22, 2023 4:46 pm
- Location: Midrand
- Status:
Offline
Scope rebuild project
I have 2 scopes (6" and 8") that I believe can be rebuilt using the mirrors (primary and secondary). My worry is that I see many discussions on small mirrors being spherical. Before I spend time on this project I would like to confirm I am not having this problem.
Any advice on how to confirm?
Once confirmed, the plan is to make better mirror supports, a lighter mount, truss tube design and computerized drive system.
I have a pi4 that I can utilize.
I need something easier to move/transport and setup.
Any advice will really be helpful.
60mm Refractor
6" Newtonian
8" Newtonian
- SkyHiker
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 5
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: Scope rebuild project
The Ronchi test can easily show the difference between spherical and parabolic mirror. Look at the comparison about 2/3 from the top of that link.Durad wrote: ↑Thu Nov 16, 2023 10:53 pm Hi All,
I have 2 scopes (6" and 8") that I believe can be rebuilt using the mirrors (primary and secondary). My worry is that I see many discussions on small mirrors being spherical. Before I spend time on this project I would like to confirm I am not having this problem.
Any advice on how to confirm?
A Pi4 is better suited to a host computer rather than a real-time controller. Look for the OnStep project for basic DIY controllers of both equatorial and alt/az mounts. It uses cheap hardware that is readily available. The OnStep controller works very well in combination with Ekos, check indilib.org for this. That would separate high- and low-level control tasks where they belong.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute