Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
I have a question about using my AD12 Dob with Baader Solar Film in the Off-Axis circle that came with the Top Lid/Dust cover. Now I am back with one scope, my Trusty AD12, and with the eclipse coming I wanted to at least attempt to image it. I wish I could throw it on my Cem70, but I had to sell the Tri-Pier for more Bills last week . So I will probably end up using the Dob with Dob Base since it already has Baader Film that I put in it.
Anyway, here is the question. By putting the Lid on the DoB and only allowing the 1.5"-2" hole (I got to measure it when I get home) with the Baader film for the Aperture, Now, What estimate would my New focal ratio be around? I am curious because I am going attempt aFocal imaging for fun with my smartphone (Had to sell all my Astro cameras too lol) and looking for an eyepiece to get the whole sun in and have a little extra wiggle room for when it drifts.
Thanks in advance,
Brian
Telescopes:Apertura AD12 Dob : iOptron CEM70 without TripodBarlows:GSO 2x Shorty Focuser: Rigel nStep
JayTee wrote: ↑Tue Sep 26, 2023 9:41 pm
You would still use the formula focal length divided by aperture of the dust cover opening. This will give you that new focal ratio.
Thanks. JT, I got rusty with my Astro, and trying to make a comeback, I should have thought of that lol.
Now what if I 3D printed a 12" Filter to cover the Front and maybe have a Hole 5",6", or 7" in the center? Would that be better?
Also, keep in mind I am using just a smartphone this time with an eyepiece but I will look through the Eyepiece as well.
Thanks Again
- Brian
Telescopes:Apertura AD12 Dob : iOptron CEM70 without TripodBarlows:GSO 2x Shorty Focuser: Rigel nStep
Remember, as with any telescope when you increase the aperture you will increase the brightness of what you're looking at plus you will also get better resolution. Increasing the aperture makes your object appear brighter for two reasons, you are gathering more photons and you are decreasing the focal ratio both of those make the object appear brighter.
I have used a mask with a 4-in opening on my 11" SCT. It produced a very usable and photographable image of the sun. Obviously, with Baader solar film over the opening.
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."