EQ5 Pro Cables!
- johnyjf
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Wed Aug 28, 2019 11:42 am
- 4
- Location: Reading UK
- Status:
Offline
EQ5 Pro Cables!
My small portable mount is an EQ5 Pro, a fairly recent acquisition. One of the obvious traits is the stiffness of all the cables. Is it really necessary for them to be this stiff and is there a supplier of a more flexible alternative?
johnyjf
johnyjf
- Petrol
- Jupiter Ambassador
- Articles: 0
- Posts: 219
- Joined: Sun Jan 22, 2023 11:40 pm
- 1
- Location: UK
- Status:
Online
-
TSS Photo of the Day
Re: EQ5 Pro Cables!
I have an EQ5 (not pro) and use it as a mobile rig for imaging. Not sure if your referring to the SW mount cables or USB cables in general but if the truth be known, the cables have little impact on the mount. Cable management is more important though to prevent fouling. The EQ5 Pro can handle quite a bit of weight so IMO it's not a problem.
HTH
Pete
HTH
Pete
Rig1. Samyang 135 F2 ED UMC, Player One Poseidon-C Pro, EQ5
Rig2. Celestron RASA 8, Zwo Asi 533 MC Pro, EQ6
APM Astrograph 107/700, Hutech/Idas filters, NINA, Pix.
lots of cables!
Rig2. Celestron RASA 8, Zwo Asi 533 MC Pro, EQ6
APM Astrograph 107/700, Hutech/Idas filters, NINA, Pix.
lots of cables!
- Lady Fraktor
- Infinity and Beyond Ambassador
- Articles: 0
- Posts: 10016
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: EQ5 Pro Cables!
The cables are fairly stiff though the connections are more robust than the older telephone line cables and connectors they used to use.
You could email FLO and ask if they know of any aftermarket cables. I cannot think of anyone that does for these.
You could email FLO and ask if they know of any aftermarket cables. I cannot think of anyone that does for these.
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
- johnyjf
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Wed Aug 28, 2019 11:42 am
- 4
- Location: Reading UK
- Status:
Offline
Re: EQ5 Pro Cables!
OK thanks for your responses. I will try FLO. Was just a little puzzled that they needed to be so heavy duty though I suppose that is better than too light at build. Also sorry about the late response, has been a little sickness in the family.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute