I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
- man1
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
I haven't been on for a while as said, but thought I share what my setup looks right now. I have to say up front, I am not into astro
photography - even with the xt10i, I use my binoculars just as much as the dobs. Several things always bothered me on the dobs,
the bumpy adjustments and the focuser that cannot handle the weight properly of my bino viewer plus the lenses.
I ended up installing a lazy Susan from Lee Valley. The original base of the xt10i is sitting on a platform that I can level. The rubber
legs of the xt10i fit directly in some pre-drilled holes on that platform. I made my own motorized focuser, as well as Az and elevation
interfaces - all use gear motors and are controlled via PWM. The resolution is variable from extremely fine to a reasonable speed
to get there (today). On the pictures you can see the fw/rev and the speed control for each...plus a master on/off switch. All is powered
by a Lipo battery that is inside the hand controller. The Lipo is a 4S and all motors are 12V worm drive units. I use my iPhone as
the compass, it doesn't show in the pictures, because I took the pictures with it.
One thing I wanted to mention - this setup is perfect for tracking - no matter what, after a few tweaks on the el/az the object
stays centered for a very long time. No more bumping and constant adjusting to follow the object..... it works super well!
Also upgraded my tripod to a fluid head setup, which works really well. It makes it so easy to swap binoculars, they all have the
matching foot for the head already installed - just slides in and lock. I also added another pair of binoculars - I seem to be a
collector....lol... Aiming made super easy with a rifle scope permanently mounted on top.
Anyway - as we get older sometimes health gets a bit in the way..... and that 5 foot high jump straight up in the air - without
taking a run at it - seems to be not as high any more..... ;-)
Cheers to all.... clear skies....
Manfred
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- Gordon Online
- Site Admin
- Articles: 1051
- Posts: 8452
- Joined: Wed Apr 24, 2019 10:52 pm
- 5
- Location: Cottonwood, AZ
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
I Broke The Forum.
TSS EAA Messier awards
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Scopes: Explore Scientific ED80CF, Skywatcher 200 Quattro Imaging Newt, SeeStar S50 for EAA.
Mounts: Orion Atlas EQ-g mount & Skywatcher EQ5 Pro.
ZWO mini guider.
Image cameras: ZWO ASI1600 MM Cool, ZWO ASI533mc-Pro, ZWO ASI174mm-C (for use with my Quark chromosphere), ZWO ASI120MC
Filters: LRGB, Ha 7nm, O-III 7nm, S-II 7nm
Eyepieces: a few.
Primary software: Cartes du Ciel, N.I.N.A, StarTools V1.4.
- Ylem
- Articles: 0
- Posts: 7624
- Joined: Sun May 12, 2019 2:54 am
- 5
- Location: Ocean County, New Jersey
- Status:
Offline
-
TSS Photo of the Day
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
-Jeff
Member; ASTRA-NJ
Orion 80ED
Celestron C5, 6SE, Celestar 8
Vixen Porta Mount ll
Coronado PST
A big box of Plossls
Little box of filters
- Thefatkitty
- Co-Administrator
- Articles: 0
- Posts: 4367
- Joined: Sat May 11, 2019 4:20 pm
- 5
- Location: Ontario, Canada
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Nicely done on all counts and all the best,
"The Hankmeister" Celestron 8SE, orange tube Vixen made C80, CG4, AZ-EQ5 and SolarQuest mounts.
Too much Towa glass/mirrors.
Solar:
H/A - PST stage 2 mod with a Baader 90mm ERF on a Celestron XLT 102 (thanks Mike!)
Ca-K - W/O 61mm, Antares 1.6 barlow, Baader 3.8 OD and Ca-K filters with a ZWO ASI174mm.
W/L - C80-HD with Baader 5.0 & 3.8 Solar film, Solar Continuum 7.5nm and UV/IR filters with a Canon EOS 550D.
Member of the RASC
- OzEclipse Online
- Moderator
- Articles: 2
- Posts: 2429
- Joined: Sat May 11, 2019 8:11 am
- 5
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
There was a commercial product available many years ago (can't remember the name, but maybe a JMI product) which had simple variable speed control on alt and az. It apparently works quite well, except at the zenith
Joe
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- helicon
- Co-Administrator
- Articles: 598
- Posts: 12424
- Joined: Mon May 06, 2019 1:35 pm
- 5
- Location: Washington
- Status:
Offline
-
TSS Awards Badges
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- Makuser
- In Memory
- Articles: 0
- Posts: 6394
- Joined: Mon May 06, 2019 12:53 am
- 5
- Location: Rockledge, FL.
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Sky-Watcher 90mm f/13.8 Maksutov-Cassegrain on motorized Multimount
Orion Astroview 120ST f/5 Refractor on EQ3 mount
Celestron Comet Catcher 140mm f/3.64 Schmidt-Newtonian on alt-az mount
Celestron Omni XLT150R f/5 Refractor on CG4 mount with dual axis drives.
Orion 180mm f/15 Maksutov-Cassegrain on CG5-GT Goto mount.
Orion XT12i 12" f/4.9 Dobsonian Intelliscope.
Kamakura 7x35 Binoculars and Celestron SkyMaster 15x70 Binoculars. ZWO ASI 120MC camera.
>)))))*>
- man1
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Thanks... It's nice to be back!
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- man1
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Hi Joe,OzEclipse wrote: ↑Tue Jul 12, 2022 12:44 am Nice mods. I use a pair of 9x63 binoculars on a very large solid Manfrotto 475B tripod. I really like the setup and yours looks similar.
There was a commercial product available many years ago (can't remember the name, but maybe a JMI product) which had simple variable speed control on alt and az. It apparently works quite well, except at the zenith
Joe
Your Manfrotto 475B is top notch, I wish I had the vertical adjustment on mine. I have to adjust the
length of the legs, but with the fast locking clips it is not to bad.
Manne
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- man1
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Thanks, I am glad to be back.....
Manne
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- OzEclipse Online
- Moderator
- Articles: 2
- Posts: 2429
- Joined: Sat May 11, 2019 8:11 am
- 5
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: I haven't been on for a while.... but thought I share some of my changes to my orion xt10i
Hi Manneman1 wrote: ↑Thu Jul 14, 2022 11:22 amHi Joe,OzEclipse wrote: ↑Tue Jul 12, 2022 12:44 am Nice mods. I use a pair of 9x63 binoculars on a very large solid Manfrotto 475B tripod. I really like the setup and yours looks similar.
There was a commercial product available many years ago (can't remember the name, but maybe a JMI product) which had simple variable speed control on alt and az. It apparently works quite well, except at the zenith
Joe
Your Manfrotto 475B is top notch, I wish I had the vertical adjustment on mine. I have to adjust the
length of the legs, but with the fast locking clips it is not to bad.
Manne
Yes the vertical adjustment is very convenient. When using binoculars, when I want to look higher in the sky or adjust the height for vertically challenged friends, I just wind the column up and down.
Joe
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute