Is This Repairable?
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Is This Repairable?
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7739
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Is This Repairable?
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
- Lady Fraktor Online
- Articles: 0
- Posts: 10031
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Online
Re: Is This Repairable?
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
- MistrBadgr
- Articles: 0
- Posts: 748
- Joined: Sat May 11, 2019 9:27 pm
- 5
- Location: Broken Arrow, Okla, USA
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
Once you find out what the issue is, I would see if a replacement part can be obtained. Unless the price is really high, a replacement part is probably the way to go in the long run. Most likely, new part will be stronger than a repaired one.
Aluminum welding can work with a very skilled welder, but someone who is experienced with aluminum welding is fairly rare, depending on who you know and where you live. If the person doing the work is not an expert, then the repair will always be suspect, either from not getting a full penetration weld or additional stresses from the welding process. You would probably want to "baby" it.
The tripod itself looks like the ones I have for my Meade LX-70 and my Celestron Omni
Hope this helps!
Many small scopes, plus a Lightbridge 12, LX 70-8R,6R,6M
Many eyepieces, just not really expensive ones.
- Richard
- Articles: 0
- Posts: 1165
- Joined: Mon May 13, 2019 6:55 am
- 4
- Location: South Africa/Czech Rep
- Status:
Offline
Re: Is This Repairable?
Refractors None
SCT C5 on a SLT mount
Mak 150 Bosma on a EQ5
- turboscrew
- Articles: 0
- Posts: 3233
- Joined: Sat Jun 20, 2020 9:22 am
- 3
- Location: Nokia, Finland
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5
I don't suffer from insanity. I'm enjoying every minute of it.
- DeanD
- Articles: 0
- Posts: 666
- Joined: Fri May 17, 2019 7:27 am
- 4
- Location: Adelaide South Australia
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
Good luck.
Dean
Binos: Steiner Wildlife XP 10x26, Swarovski 8x30 Habicht, Zeiss SFL 8x40, Vanguard Endeavour 10.5x45, Fuji FMTR-SX 10x50, Tak 22x60, Orion Resolux 15x70
Eyepieces: way too many (is that possible?), but I do like my TV 32mm plossl, 13mm Nagler T6, 27mm Panoptic and 3-6mm Nagler zoom, plus Fujiyama 18mm and 25mm orthos and Tak 7.5mm LE
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
I do not notice anything/parts cracked on the outside. I have a friend that use to be a TV repair technician. He has all kinds of tools. Soon we will open it up for inside images. thanks DeanD
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7739
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Is This Repairable?
If it breaks so easily would it be better to buy something else? I notice you use Orion's pier extension which could be fitted on other brands. I use it with tripods fromRefractordude wrote: ↑Mon May 16, 2022 10:23 pm Still working on fixing it. Just in case it can not be fixed I was searching the WWW for a replacement. Could not find the tripod that I need. Firstlightoptics in England has a few in stock. The cost is $200 with shipping. Looking for a seller in the States. thanks all
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7739
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Is This Repairable?
Just an example
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
If I could find one of these in stock would thisBigzmey wrote: ↑Mon May 16, 2022 11:59 pmIf it breaks so easily would it be better to buy something else? I notice you use Orion's pier extension which could be fitted on other brands. I use it with tripods fromRefractordude wrote: ↑Mon May 16, 2022 10:23 pm Still working on fixing it. Just in case it can not be fixed I was searching the WWW for a replacement. Could not find the tripod that I need. Firstlightoptics in England has a few in stock. The cost is $200 with shipping. Looking for a seller in the States. thanks allES .
https://optcorp.com/collections/explore ... legs-white
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7739
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Is This Repairable?
Yes, I have one of those. You need to file the pin on the tripod little bit, after that it fits Orion extension pier.Refractordude wrote: ↑Tue May 17, 2022 12:29 amIf I could find one of these in stock would thisBigzmey wrote: ↑Mon May 16, 2022 11:59 pmIf it breaks so easily would it be better to buy something else? I notice you use Orion's pier extension which could be fitted on other brands. I use it with tripods fromRefractordude wrote: ↑Mon May 16, 2022 10:23 pm Still working on fixing it. Just in case it can not be fixed I was searching the WWW for a replacement. Could not find the tripod that I need. Firstlightoptics in England has a few in stock. The cost is $200 with shipping. Looking for a seller in the States. thanks allES .ES work with the extension tube?
https://optcorp.com/collections/explore ... legs-white
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
- DeanD
- Articles: 0
- Posts: 666
- Joined: Fri May 17, 2019 7:27 am
- 4
- Location: Adelaide South Australia
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
I assume that there is some sort of ledge in the casting that has broken off. Cast is hard to repair as noted in the first few responses... Do you have an image of the un-broken casting on the other legs?Refractordude wrote: ↑Tue May 17, 2022 6:36 pm Well the problem is a chipped inside. There is enough of this chipped area missing that the leg will not catch like the others. Your thoughts and thanks.
I would be chasing Orion to give you a replacement, given this is obviously a fault stemming from their manufacture/design.
Failing that I would probably try to drill into it and put something like a couple of stainless steel pins or rivets into the casting to take the place of the broken ledge, fixed in with epoxy. The leg would then push against the heads of the pins. I have no idea whether this would work though!
Maybe another option would be to get some "liquid metal" filler that is used for car repairs, like "Permatex Liquid Metal Filler". This could be used in conjunction with a small pin to stop it cracking off again.
However, unfortunately I think the best option is a new tripod as discussed above. The surveyors tripod seems a good option to me.
Good luck.
Dean
Binos: Steiner Wildlife XP 10x26, Swarovski 8x30 Habicht, Zeiss SFL 8x40, Vanguard Endeavour 10.5x45, Fuji FMTR-SX 10x50, Tak 22x60, Orion Resolux 15x70
Eyepieces: way too many (is that possible?), but I do like my TV 32mm plossl, 13mm Nagler T6, 27mm Panoptic and 3-6mm Nagler zoom, plus Fujiyama 18mm and 25mm orthos and Tak 7.5mm LE
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Re: Is This Repairable?
Thanks DeanDDeanD wrote: ↑Wed May 18, 2022 2:19 amI assume that there is some sort of ledge in the casting that has broken off. Cast is hard to repair as noted in the first few responses... Do you have an image of the un-broken casting on the other legs?Refractordude wrote: ↑Tue May 17, 2022 6:36 pm Well the problem is a chipped inside. There is enough of this chipped area missing that the leg will not catch like the others. Your thoughts and thanks.
I would be chasing Orion to give you a replacement, given this is obviously a fault stemming from their manufacture/design.
Failing that I would probably try to drill into it and put something like a couple of stainless steel pins or rivets into the casting to take the place of the broken ledge, fixed in with epoxy. The leg would then push against the heads of the pins. I have no idea whether this would work though!
Maybe another option would be to get some "liquid metal" filler that is used for car repairs, like "Permatex Liquid Metal Filler". This could be used in conjunction with a small pin to stop it cracking off again.
However, unfortunately I think the best option is a new tripod as discussed above. The surveyors tripod seems a good option to me.
Good luck.
Dean
- Richard
- Articles: 0
- Posts: 1165
- Joined: Mon May 13, 2019 6:55 am
- 4
- Location: South Africa/Czech Rep
- Status:
Offline
Re: Is This Repairable?
Refractors None
SCT C5 on a SLT mount
Mak 150 Bosma on a EQ5
- JayTee
- Articles: 2
- Posts: 5651
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Is This Repairable?
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute